Question: Why Are Chainsaws So Dangerous?

Should you run a chainsaw at full throttle?

Good practice to run full throttle most all of the time.

There may be some instances where you want to feather the throttle for a fine cut or finishing a bucking cut to not hit the dirt or what have you.

That’s fine just don’t make anything less than full throttle the norm..

Can you cut with the tip of a chainsaw?

If you cut with the bottom of the bar, the spinning chain will pull the saw into the log and downward. This is generally the safest way to cut. The most dangerous is to use the tip, which can see the chain’s rotation sending the business end of the saw upwards and directly at your mug.

What is the safest saw?

circular sawThe circular saw is safer because it’s less powerful and help firmly in your hand. The safety factor is greatly improved by not making bone-headed cuts. Sheet goods have little internal stress so with proper support shouldn’t ever pinch.

Can a table saw cut a 4×4?

A standard 10 inch table saw can’t cut all the way through a 4×4 in one pass. The deepest cut a 10 inch blade can cut is about 3-⅛ inch. A high-end table saw with a 12 inch blade can cut a 4×4 in one pass with maximum cut of about 4 inches.

How fast is a table saw kickback?

If the saw blade travels at 4,800 revolutions per minute (rpm), then the teeth are travelling at 150,720 inches per minute. To put that another way, that’s 9,043,200 inches per hour, or 142.72 mph!

What should you not do with a chainsaw?

Don’t ever run while carrying a chainsaw. Do try to avoid cutting with the blade tip, this will also help avoid kickback. Do try cut below shoulder height wherever possible. This will keep a chainsaw away from your face in the event of kickback.

What is the most dangerous tool?

Table Saws. … Snowblowers. … Circular Saws. … Riding Lawnmowers. … Power Drills. … Backhoes. … Air Compressors. You’d think the tool at the other end of the hose posed the only danger, but compressors cause 2,400 injuries a year. … Wood Chippers. Only 3 per year on average die using these tools.More items…•

How long should you run a chainsaw?

Information we found online suggests that Stihl Pro Chainsaws have a run time of about 2,000 hours. That means the saw would last you for a minimum of 5.5 years before dying.

Why does my chainsaw bogs down at full throttle?

The Job of the Carburetor Without the right amount of air and fuel in the piston cylinder, the 2-cycle engine in a Stihl chain saw runs inefficiently and the saw loses power. … When the saw bogs down during cutting, it’s usually the high-speed screw you need to adjust.

Can a bandsaw replace a table saw?

While bandsaws and table saws are capable of a few similar cuts, one simply cannot replace the full function of the other.

How dangerous is using a chainsaw?

There are many high risk and highly likely hazards associated with chainsaw use. Some common hazards are: you can cut yourself, kick-back, noise, vibrations, eyes injuries, the chain can derail/break, head injuries, back injuries, crushing under falling tree and so on.

Why are table saws so dangerous?

The majority of these injuries are due to kickback. … The two main causes of injury from kickback is trauma from the wood striking the head, chest, or torso of the woodworker, or the wood moving so quickly that an operator doesn’t have time to take their hand off of it and it gets pulled across the saw blade.

Can you cut wet wood with a chainsaw?

Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water. … Using your chainsaw to cut through wet wood will not change the efficiency of your chainsaw.

What is the best table saw for the money?

Quick OverviewBest Portable Table Saw – DEWALT DW7485/XA.Best Contractor Table Saw – DEWALT DWE7491RS.Best Hybrid Table Saw – Shop Fox W1837.Best Cabinet Table Saw – SawStop PCS175-TGP236.Best Budget Portable Table Saw – SKIL 3410-02.Best Value Portable Table Saw – Bosch GTS1031.More items…•