What’S The Best Way To Apply Thompson’S Water Seal?

How much is a 5 gallon bucket of Thompson’s Water Seal?

Compare with similar itemsThis item Thompson’s TH.024105-20 Waterseal Clear Multi-Surface Waterproofer, five gallon bucketCustomer Rating4.5 out of 5 stars (36)PriceFrom $63.50Sold ByAvailable from these sellersItem Dimensions11.80 x 14.00 x 11.75 inches2 more rows.

What is the best way to apply Thompson’s Water Seal?

Surfaces must be thoroughly cleaned prior to application with a deck cleaner (like those in the Thompson’s® WaterSeal® cleaner line) applied according to label directions and cautions. If surface is damp or wet from cleaning or weather, allow the surface to dry thoroughly (a minimum of 48 hours) before application.

How many coats of Thompson Water Seal do I need?

2 coatsshake the can vigorously before use. Thompson’s Water seal has a slightly milky appearence in the can,but clears quickly upon application. For best results ensure the surface is as dry as possible. Apply 2 coats using brush,roller or sprayer.

How long does Thompson’s Water Seal take to cure?

Coverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you’re coating. Remove as much product as possible from equipment before cleaning.

Can you put 2 coats of Thompson’s Water Seal?

Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

What is the longest lasting deck sealer?

1. BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

Can you apply Thompson’s Water Seal with a roller?

Even if you don’t want to buy a garden sprayer, you can still use plenty of other tools. Paint rollers, paint pads, and brushes should still work just fine when you apply Thompson’s water seal.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

Should I use Thompson Water Seal on pressure treated wood?

However, most pressure-treated wood should have periodic sealing against moisture, preferably every year or so. … The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.

Can I mix stain and Thompson’s Water sealer?

As long as it’s all oil based you should be able too. But if it’s a solid color stain it might turn a little transparent if mixed with the sealer…..just give it a try on a scrap piece. Bingo. As long as they use the same solvents, it should be fine.

How much does a gallon of Thompson’s Water Seal cover?

That determines how many gallons of stain are required (each gallon covers up to 400 square feet).

How often do I need to apply Thompson’s Water Seal?

every one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

Is it better to stain or seal a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

Can you put polyurethane over Thompson’s Water Seal?

Thompson’s Waterseal with stain is a protective finish for exterior wood. … Other sealers or clear finishes will not adhere well to a Thompsons stain and may result in the topcoat failing prematurely. Most likely the clear sealer or polyurethane will end up peeling and flaking off the stain.